Sound absorption material

• Film-faced absorption FA
  Oil and water proof sound absorption. A polyurethane foam, polyether based with barrier film of 0.025 mm polyurethane, polyester based.
  Use:
  Engine compartment lining in cars, tractors, trucks, construction machinery, boats, compressors etc. May be used in any area where there is a need for oil and water proof absorption.
  

  Standard sizes: Thickness: 10 mm, 20 mm and 30 mm Sheet size: 1000 mm x 1500 mm Other dimensions available on request

• Faced Absorption PA
  Polyurethane foam, polyether based sound absorber faced with a 4 % perforated pvc.
  Use:
  Intended for use in areas where appearance and durability is important, for example in control room areas.

  Standard sizes: Thickness: 20 mm Sheet size: 1000 mm x 1500 mm Other dimensions available on request

• Absorption Foam UAR
  Recycled Foam Absorber without facing.
  Use:
  Intended for use in areas where there are no problems from oil or water and where appearance is not important. Also finds use in floating floor constructions.

  Standard sizes: Thickness: 10 mm, 20 mm and 30 mm Sheet size: 1000 mm x 2000 mm Other dimensions available on request